Precision 14
| Development | |
|---|---|
| Designer | Stephen Seaton |
| Location | United States |
| Year | 1985 |
| Builder | Precision Boat Works |
| Role | Day sailer |
| Name | Precision 14 |
| Boat | |
| Displacement | 250 lb (113 kg) |
| Draft | 2.75 ft (0.84 m) with centerboard down |
| Hull | |
| Type | monohull |
| Construction | fiberglass |
| LOA | 13.83 ft (4.22 m) |
| LWL | 11.83 ft (3.61 m) |
| Beam | 6.08 ft (1.85 m) |
| Hull appendages | |
| Keel/board type | centerboard |
| Rudder | transom-mounted rudder |
| Rig | |
| Rig type | Bermuda rig |
| Sails | |
| Sailplan | fractional rigged sloop |
| Total sail area | 129.00 sq ft (11.984 m2) |
The Precision 14 is an American sailing dinghy that was designed by Stephen Seaton as a day sailer and first built in 1985.[1][2][3]
Production
[edit | edit source]The design was built by Precision Boat Works in Palmetto, Florida, United States, starting in 1985, but it is now out of production.[1][3][4]
Design
[edit | edit source]The Precision 14 is a recreational sailboat, built predominantly of fiberglass, with wood trim. It has a fractional sloop rig; a raked stem; a plumb transom; a transom-hung, kick-up rudder controlled by a tiller, with a hiking stick and a retractable centerboard. It displaces 250 lb (113 kg).[1][3]
The boat has a draft of 2.75 ft (0.84 m) with the centerboard extended and 0.42 ft (0.13 m) with it retracted, allowing operation in shallow water, beaching or ground transportation on a trailer.[1][3]
See also
[edit | edit source]References
[edit | edit source]- ^ a b c d Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ a b c d Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
