Precision 13
| Development | |
|---|---|
| Designer | Stephen Seaton |
| Location | United States |
| Year | 1985 |
| Builder | Precision Boat Works |
| Role | Racer |
| Name | Precision 13 |
| Boat | |
| Crew | one |
| Displacement | 140 lb (64 kg) |
| Draft | 2.67 ft (0.81 m) |
| Hull | |
| Type | monohull |
| Construction | fiberglass |
| LOA | 13.16 ft (4.01 m) |
| LWL | 12.16 ft (3.71 m) |
| Beam | 4.67 ft (1.42 m) |
| Hull appendages | |
| Keel/board type | daggerboard |
| Rudder | transom-mounted rudder |
| Rig | |
| Rig type | Cat rig |
| Sails | |
| Sailplan | Catboat |
| Mainsail area | 85.00 sq ft (7.897 m2) |
The Precision 13 is an American single-handed sailing dinghy that was designed by Stephen Seaton as a racer and first built in 1985.[1][2][3]
Production
[edit | edit source]The design was built by Precision Boat Works in Palmetto, Florida, United States, starting in 1985, but it is now out of production.[1][3][4]
Design
[edit | edit source]The Precision 13 is a recreational sailboat, built predominantly of fiberglass, with aluminum spars. It has a catboat rig, a raked stem, a plumb transom, a transom-hung rudder controlled by a tiller and a retractable daggerboard. It displaces 140 lb (64 kg).[1][3]
The boat has a draft of 2.67 ft (0.81 m) with the daggerboard extended and 0.33 ft (0.10 m) with it retracted, allowing operation in shallow water, beaching or ground transportation on a trailer or car rooftop.[1][3]
See also
[edit | edit source]Similar sailboats
References
[edit | edit source]- ^ a b c d Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ a b c d Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
