Space Communications and Navigation Program

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search
Technicians at NASA Glenn Research Center at work on the Space Communications and Navigation Testbed, formerly known as the Communications, Navigation, and Networking reConfigurable Testbed (CoNNeCT) project[1]

The Space Communications and Navigation (SCaN) program places the three prime NASA space communications networks, Space Network (SN), Near Earth Network (NEN) (previously known as the Ground Network or GN), and the Deep Space Network (DSN), under one Management and Systems Engineering umbrella. It was established in 2006. It was previously known as the Space Communications & Data Systems (SCDS) Program.

History

[edit | edit source]

Before NASA's administrator Michael D. Griffin created SCaN to direct an integrated networks program, different organizations at NASA Headquarters have managed the Agency's space communications capabilities and functions under separate Programs using a variety of administrative approaches.[2]

The SCaN Office was established by direction of Griffin in a Memorandum entitled "Establishment of a Space Communications and Navigation Office," dated July 19, 2006.[3] SCaN operates as a central organization within the Space Operations Mission Directorate.

The Office's responsibilities encompass the management of existing space networks including the Tracking and Data Relay Satellite system, the Deep Space Network, the Ground Network, the NASA Integrated Services Network; implementing any improvements and upgrades to those systems and networks; and developing any future NASA communications and navigation architectures.

The Ground Network (GN) has since been renamed the Near Earth Network.

Services

[edit | edit source]

SCaN is viewed as a service provider supporting interfaces and performing a standard set of functions, including:[4]

  • Forward data transfer (uplink to spacecraft)
  • Return data transfer (downlink from spacecraft to ground)
  • Dissimilar voice communications
  • Emergency communications
  • Post-landing communications
  • Radiometric measurement
  • Time correlation
  • Service monitoring
  • Ephemeris exchange
  • Operational coordination
  • Service scheduling.

Communications schemes

[edit | edit source]

Communications with spaceborne platforms is performed by RF, with a selection of spectra, modulation, and encoding methods, enumerated below.

Spectra

[edit | edit source]

The Space Network communicates with spacecraft using S-band, Ku-band,[5] and Ka-band with planned laser/optical communications.

The Deep Space Network communicates with spacecraft using S-band, X-band, and Ka-band.

Modulation

[edit | edit source]

SN uses phase-shift keying and phase modulation of the carrier signal.[6]

Encoding

[edit | edit source]

The Space Network (used for near-Earth communications) supports the following encoding schemes:[7]

The Reed–Solomon method is used as the initial error-correcting block code prior to the selected secondary encoding scheme.

See also

[edit | edit source]

References

[edit | edit source]
  1. ^ SCaN Testbed homepage at NASA Glenn Research Center
  2. ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  3. ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  4. ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  5. ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  6. ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  7. ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
[edit | edit source]