VRAS
This article needs additional citations for verification. (August 2015) |
The Variable Room Acoustics System (VRAS) is an acoustic enhancement system for controlling room acoustics electronically.[1] Such systems are increasingly being used to provide variable acoustics for multipurpose venues.[2][3]
VRAS uses multiple microphones distributed around the room, fed via a multichannel digital reverberator to multiple loudspeakers to provide controllable enhancement of the reverberation time of the room. It is an example of a non-in-line or regenerative sound system which uses the inherent feedback of sound from the loudspeakers to the microphones to enhance the reverberation time for all sound source positions within the room. VRAS uses a unitary reverberator which maintains a constant power gain with frequency so that its inclusion does not affect the stability of the system (at each frequency, the reverberator is a unitary matrix).[4]
In addition, VRAS uses a number of microphones close to the stage area to detect early energy from the performers, which is used to generate early reflections. Such systems are termed in-line or non-regenerative. In-line systems aim to minimise the effects of regeneration by detecting stage sound at a high level, and may then be used to generate early reflections or late reverberation.
VRAS is thus a hybrid system that uses both regenerative and non-regenerative approaches.
VRAS was developed by Mark Poletti at Industrial Research Limited,[5][failed verification], New Zealand and commercialized by LCS Audio. VRAS is now a part of the Meyer Sound Laboratories Constellation system.
See also
[edit | edit source]References
[edit | edit source]- ^ [ M. A. Poletti, "The performance of a new assisted reverberation system," Acta Acustica, 2 December 1994, pp 511-524]
- ^ [B. Blesser and L-R Salter, “Spaces speak, are you listening? Experiencing aural architecture,” The MIT Press, Cambridge, Massachusetts, 2007]
- ^ [ M. Barron, Auditorium acoustics and architectural design, E and F.N. Spon, 1993]
- ^ [ M. A. Poletti, ”The stability of single and multichannel sound systems,” Acustica-Acta Acustica, vol. 86, pp 123-178, 2000]
- ^ Industrial Research Limited Archived 2009-10-28 at the Wayback Machine
Technical Papers
[edit | edit source]- Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- M. A. Poletti, “An assisted reverberation system for controlling apparent room absorption and volume,” 101st convention of the Audio Engineering Society, Los Angeles, November 8–11, 1996
- M. A. Poletti, “A comparison of passive and active coupled rooms for acoustic control” Internoise 98, Christchurch 16–18 November
- S. Ellison and M. Poletti, "Variable Room Acoustics System: Philosophy and Applications", Proc. Institute of Acoustics, Volume 22 Pt 6 2000, p 215-223
- S. Ellison and M. A. Poletti, Control of room acoustic parameters by the Variable Room acoustics System, Reproduced Sound 2004
- M. A. Poletti and R. Schwenke, “Prediction and Verification of Powered Loudspeaker Requirements for an Assisted Reverberation System,” 121st AES Convention 2006 October 5–8, San Francisco, CA, USA
External links
[edit | edit source]- Meyer Sound
- Industrial Research Limited Archived 2009-10-28 at the Wayback Machine