Template:Chembox CalcTemperatures/doc

Values for Melting point, Boiling point (properties) and Flash point, Autoignition temperature (hazards) can convert temperatures into the set of °C, °F and K. They also can produce a temperature range, like 10 to 20 °C (50 to 68 °F; 283 to 293 K). Also, unformatted texts can be entered.

Usage

Four or less parameters are needed to present temperature data:

|MeltingPt=Decomposes when > |MeltingPtC=50 |MeltingPt_ref=<ref>[www.example.com]</ref> |MeltingPt_notes=My notes<ref>[www.chemspider.com]</ref>	Decomposes when >_50 °C (122 °F; 323 K)_My notes
The options for conversion: |MeltingPtC=50 |MeltingPtF=50 |MeltingPtK=50 Temperature range: |MeltingPtC=50 to 70 |MeltingPtF=50 to 70 |MeltingPtK=50 to 70	50 °C (122 °F; 323 K) 10 °C; 50 °F; 283 K −223.2 °C; −369.7 °F; 50.0 K 50 to 70 °C (122 to 158 °F; 323 to 343 K) 10 to 21 °C; 50 to 70 °F; 283 to 294 K −223.2 to −203.2 °C; −369.7 to −333.7 °F; 50.0 to 70.0 K

| Section = {{Chembox Properties | MeltingPt = | MeltingPtC = | MeltingPtF = | MeltingPtK = | MeltingPt_ref = | MeltingPt_notes = | BoilingPt = | BoilingPtC = | BoilingPtF = | BoilingPtK = | BoilingPt_ref = | BoilingPt_notes = }}

{{Chembox Properties}} - all temperature parameters Any text for melting point value Temperature, number only. Can be a range: '100 to 200'  number, when in degrees Fahrenheit  number, when in kelvins References (always shows, right after calculations or 'any text') Notes (always shows last; can include references) Any text for boiling point value Temperature, number only. Can be a range: '100 to 200'  number, when in degrees Fahrenheit  number, when in kelvins References (always shows, right after calculations or 'any text') Notes (always shows last; can include references)

| Section = {{Chembox Hazards | FlashPt = | FlashPtC = | FlashPtF = | FlashPtK = | FlashPt_ref = | FlashPt_notes = | AutoignitionPt = | AutoignitionPtC = | AutoignitionPtF = | AutoignitionPtK = | AutoignitionPt_ref = | AutoignitionPt_notes = }}

{{Chembox Hazards}} - all temperature parameters Any text for Flash point value. Temperature, number only. Can be a range: '100 to 200'  number, when in degrees Fahrenheit  number, when in kelvins References (always shows, right after calculations or 'any text') Notes (always shows last; can include references) Any text for autoignition temperature value Temperature, number only. Can be a range: '100 to 200'  number, when in degrees Fahrenheit  number, when in kelvins References (always shows, right after calculations or 'any text') Notes (always shows last; can include references)