swsusp

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search
swsusp
Repository
  • {{URL|example.com|optional display text}}Lua error in Module:EditAtWikidata at line 29: attempt to index field 'wikibase' (a nil value).
Written inC
Engine
    Lua error in Module:EditAtWikidata at line 29: attempt to index field 'wikibase' (a nil value).
    Operating systemLinux
    LicenseGNU General Public License

    swsusp (Software Suspend) is a kernel feature (i.e., program) which is part of power management framework in the Linux kernel.[1] It is the default suspend framework as of kernel 3.8.

    Objective

    [edit | edit source]

    SWSUSP helps to drive the system to a low power state (called suspend) when not actively used, while providing the ability to return to the same state as before suspend (called resume/restore).

    Features

    [edit | edit source]

    As of 3.8 Swsusp provides the following options under suspend:

    • StandBy: the CPU and main memory (RAM) both are powered up (CPU could be in Wait for Interrupt/WFI)
    • Suspend to RAM: the CPU could be powered down while the RAM is up and in Self-refresh state.
    • Suspend to Disk: a snapshot of the current system including CPU registers and memory contents are stored in an image in non-volatile memory such as a hard disk and the system is powered down.

    For more details on Swsusp refer to kernel documentation under Documentation/power/swsusp.txt

    Usage

    [edit | edit source]

    To enable swsusp, the following should be selected during kernel configuration:

    Power management options → <*>Power management support (CONFIG_PM) 
    Power management options → <*>Software Suspend (CONFIG_SOFTWARE_SUSPEND) 
    Power management options → [/dev/resume_partition]Default resume partition (CONFIG_PM_STD_PARTITION) 
    

    The /dev/resume_partition needs to be replaced by the actual swap partition that is to be used for suspending. Otherwise, resume=/dev/resume_partition can be given as a parameter during system bootup. The actual suspend is done by:

    echo shutdown > /sys/power/disk; echo disk > /sys/power/state

    You may check other suspend options available by doing

    cat /sys/power/state

    depending on your kernel config, it will show something similar to [standby] mem disk

    and options available under disk can be viewed by

    cat /sys/power/disk

    depending on your kernel config, it will show something similar to [platform] shutdown reboot

    swsusp lacks compression and graphical progress indication, which can be provided through Uswsusp.

    See also

    [edit | edit source]
    • TuxOnIce, is another implementation of suspend to disk and is based on SWSUSP. TuxonIce as of date(30/7/13) is maintained as a patch outside mainline kernel.
    • uswsusp userspace software for suspending to ram and/or disk

    References

    [edit | edit source]
    1. ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).