Scanning flow cell
This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages)
|
Scanning Flow Cell (SFC) is an electrochemical technique, based on the principle of channel electrode. The electrolyte is continuously flowing over a substrate that is introduced externally on translation stage. In contrast to the reference and counter electrode that are integrated in the main channel or placed in side compartments connected with a salt bridge.[citation needed]
SFC utilizes V-formed geometry with a small opening on the bottom (in range of 0.2-1mm diameter) used to establish the contact with sample. The convective flow is sustained also in non-contact mode of operation that allows easy exchange of the working electrode.[1]
Application
[edit | edit source]The SFC is employed for combinatorial and high-throughput electrochemical studies. Due to its non-homogenous flow profile distribution, it is currently used for comparative kinetic studies. SFC is predominantly used for coupling of electrochemical measurements with post analytical techniques like UV-Vis, ICP-MS, ICP-OES etc. This makes possible a direct correlation of electrochemical and spectrometric signal. This methodology was successfully applied for corrosion studies.[2][3]
References
[edit | edit source]- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).