Reglet
A reglet is found on the exterior of a building along a masonry wall, chimney or parapet that meets the roof. It is a groove cut within a mortar joint that receives counter-flashing meant to cover surface flashing used to deflect water infiltration. Reglet can also refer to the counter-flashing itself when it is applied on the surface, known as "face reglet" or "reglet-flashing".
Description
[edit | edit source]Reglet Groove
[edit | edit source]The reglet is created typically with a grinder or masonry cutting saw that cuts 3/4" to 1-1/2" deep into a mortar joint between two bricks.[1] The counter-flashing is then inserted to the reglet and held in place with thin metal wedge covered with a sealant.
Face Reglet
[edit | edit source]A face reglet (also known as reglet-flashing) is counter-flashing that is typically made out of either copper or lead-coated copper.[2] It is applied on the surface of the wall or parapet and screwed into place, with additional sealant placed between the surface and the counter-flashing.[3] It is easily removable for roof repair and flashing replacements.
A face reglet can also be called a raggle[4] and may be related to regle, a groove.
Assembly
[edit | edit source]-
Section of Reglet Groove and counter-flashing insert
-
Section of Face Reglet and attachment to masonry wall
See also
[edit | edit source]References
[edit | edit source]- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Cash, Carl G.. Roofing failures. London: Spon, 2003. Chapter 6. Print.
- ^ Ryan, Thomas, Edward Allen, and Patrick Rand. Detailing for landscape architects: aesthetics, function, constructibility. Hoboken, N.J.: Wiley, 2011. 37. Print.
