Hacking knife

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search
File:Hacking knife chopping glazing putty.jpg
Glazing work, removing old putty before re-glazing

Hacking or side knives are heavyweight knives.

They are strongly constructed with a single-sided straight edge. The back of the blade is exposed for hammering on. This back edge is intended to be hit with a steel hammer, not a wooden mallet or club. The handle is a solid steel through tang, with side scales. The scales are often of thick leather, to absorb shocks.

Their typical uses are either for glazier's work, or else as a light froe for splitting timber.

Glazing

[edit | edit source]

The hacking knife is used to chop out old putty before replacing glass panes. The cut is always made into the side of the frame, parallel to the surface of the glass, so as to avoid striking the glass and probably cracking it. Old putty is brittle and easily breaks out into small pieces. The hacking knife is strong enough to cut through any hidden glazing sprigs (small nails) that are hidden beneath the putty.

Splitting timber

[edit | edit source]

The side knife may be used as a light froe, for splitting small billets of wood.[1] It is driven through the billet using a hammer. Unlike a froe's extended handle, the side knife does not permit twisting to lever the split open and so it must be driven through all the way.

File:Splitting with hacking knife, end on.jpg
Beginning the split
File:Splitting with hacking knife.jpg
Cleaving with the side knife
File:Split billet and hacking knife.jpg
Cleaving complete, with a split billet

References

[edit | edit source]
  1. ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).