Coordinates: 43°54′58″N 72°33′18″W / 43.91619°N 72.55504°W / 43.91619; -72.55504

Gifford Covered Bridge

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

Gifford Covered Bridge
File:GiffordBridge.JPG
CarriesAutomobile
CrossesSecond Branch of White River
LocaleRandolph, Vermont
Maintained byTown of Randolph
ID numberVT-09-03
Characteristics
DesignCovered, King post
MaterialWood
Total length54.75 ft (16.69 m)
Width14.8 ft (4.51 m)
No. of spans1
Load limit3 tons
Clearance above10 ft (3.0 m)
History
Constructed byunknown
Construction end1904
Gifford Covered Bridge
Lua error in Module:Location_map at line 411: Malformed coordinates value.
CoordinatesLua error in Module:Coordinates at line 489: attempt to index field 'wikibase' (a nil value).
Area1 acre (0.4 ha)
NRHP reference No.74000240[1]
Added to NRHPJuly 30, 1974
Location
Lua error in Module:Infobox_mapframe at line 51: attempt to index field 'wikibase' (a nil value).

The Gifford Covered Bridge, also called the C.K. Smith Covered Bridge,[2] is a wooden covered bridge that crosses the Second Branch of the White River in Randolph, Vermont on Hyde Road. It was listed on the National Register of Historic Places in 1974.[1] It is one of two bridges in the state that was uncovered when first built, its trusses boxed for shelter.

Description and history

[edit | edit source]

The Gifford Covered Bridge is located in a rural setting on the far east side of Randolph. It is a short way east of Vermont Route 14, carrying Hyde Road across the Second Branch White River. It is a single-span King post truss structure, 51.5 feet (15.7 m) long, with a roadway width of 14.5 feet (4.4 m) (one lane) and a total width of 17 feet (5.2 m). It is set on concrete abutments, and is covered by an independent post-and-beam structure. The portal ends of the structure extend beyond the trusses, and it is covered by a metal roof, with vertical board siding.[3]

The bridge's construction date and builder are not known. It is one of only two covered bridges in Vermont (the other being the nearby Braley Covered Bridge) in which the king-post truss reaches only half the height of the bridge. The reason for this is that the bridge was most likely built uncovered, its trusses covered by planking to protect them from the elements. It was later covered (c. 1904) by the existing post-and-beam structure.[3]

Circa 1955 the bridge deck was reinforced with steel Ɪ-beams above the roadway which are in turn tied to Ɪ-beams below, a relatively unusual way of strengthening a covered bridge. In 2001, extensive repairs were made to the bridge, including raising it up from the river to help prevent flood waters from reaching the deck. Despite the repairs, a relatively low weight limit of 3 tons remains on the bridge. There is evidence that the weight limit is forcing heavy vehicles to ford the shallow river next to the bridge.[4]

File:Gifford Covered Bridge.jpg

See also

[edit | edit source]

References

[edit | edit source]
  1. ^ a b Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  2. ^ U.S. Geological Survey Geographic Names Information System: C.K. Smith Covered Bridge
  3. ^ a b Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value). with photos from 1974
  4. ^ Evans, Benjamin and June. New England's Covered Bridges. University Press of New England, 2004. Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).