Gear housing
The gear housing is a mechanical housing that surrounds the mechanical components of a gear box. It provides mechanical support for the moving components, protection from the outside world for those internal components, and a fluid-tight container to hold the lubricant that bathes those components.
Types of housings
[edit | edit source]A split housing is like a walnut shell, the housing is divided in two parts, with a lower part that ties down the Gear Box to the structure, supports all the components during the assembly stage and holds the lubrication oil; and the upper part that completes the enclosure and provides mechanical integrity to the housing. The upper and lower parts of the housing have a mating surface that seals perfectly to the housing to avoid oil leaks and fatigue of the housing.
A bathtub housing is made on a single piece and has a top opening for servicing the gear box and side opening to accommodate the bearing housing associated to the gear shafts. Associated with less lubricant leakage but is more difficult to assemble and repair.
Methods of manufacture
[edit | edit source]Traditionally a gearbox casing is made from cast iron or cast aluminium, using methods of permanent mold casting[1] or shell molding.[2] Experimentally, though, composite materials have also been used.[3]
See also
[edit | edit source]References
[edit | edit source]- ^ Todd, Allen & Alting 1994, pp. 258–262.
- ^ Degarmo, Black & Kohser 2003, p. 308.
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
Bibliography
[edit | edit source]- Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).