Arthur Highway
Arthur Highway | |
|---|---|
| Lua error in Module:Infobox_mapframe at line 197: attempt to index field 'wikibase' (a nil value). | |
| General information | |
| Type | Highway |
| Length | 69.9 km (43 mi) |
| Route number(s) | |
| Former route number | File:Australian state route 7.svg State Route 7[1] |
| Major junctions | |
| North end | |
| |
| South end |
|
| Location(s) | |
| Major settlements | Copping, Dunalley, Eaglehawk Neck |
| Highway system | |
The Arthur Highway (A9) is a Tasmanian highway which runs from Sorell in the near south to Port Arthur in the far south-east.[2][3]
Route description
[edit | edit source]From a roundabout with the Tasman Highway outside Sorell the highway runs northeast to another roundabout roughly housing its former alignment inside Sorell, crossing Iron Creek before turning south-east to Forcett. From there it continues in an easterly direction, crossing the Carlton River, to Copping, where it turns south to Dunalley. Here it crosses the Denison Canal via a swing bridge to the Forestier Peninsula, before continuing south-east to Eaglehawk Neck, the entry to the Tasman Peninsula. After following the southern shore of Eaglehawk Bay to the west the highway turns south and continues in that direction to Port Arthur where it transitions to route B37 (Nubeena Road).[4]
History
[edit | edit source]Port Arthur (the town) was named for George Arthur, the lieutenant governor of Van Diemen’s Land.[5] It is likely that the name of the highway was derived from this source.
The first "proper" crossing of the Carlton River, near the line now followed by the highway, was opened in 1883. It consisted of multiple wooden bridges and causeways.[6] Work commenced on a concrete bridge, a replacement for all three wooden bridges on a slightly altered alignment, in 1944.[7]
The Denison Canal opened in 1905 with a wooden, manually operated swing bridge. This was replaced by an electrically operated bridge in 1965.[8]
The highway used to end at traffic signals at a rather space-limited dogleg intersection with Tasman Highway and Station Lane in the centre of Sorell. The first stage of the Sorell Bypass opened in 2022, slightly extending Arthur Highway south toward Hobart just outside Sorell, avoiding the town. This allowed traffic to bypass Sorell[9] instead of going right through the town on Tasman Highway or using Parsonage Place (to which was applied a 5-tonne limit, despite accompanying stop-gap improvements and a rename). There is a reserve towards William Street in which Tasman Highway will once bypass the town, but currently the traffic must still use the old Arthur Highway terminus to exit the town northwest.
Major intersections
[edit | edit source]| LGA | Location | km[4] | mi | Destinations | Notes |
|---|---|---|---|---|---|
| Sorell | Sorell | 0 | 0.0 | File:AUS Alphanumeric Route A3.svg Tasman Highway (A3) – north – Penna, Orford, Richmond / south – Cambridge, Hobart | Northern end of Arthur Highway |
| 1.3 | 0.81 | File:AUS Alphanumeric Route A3.svg Arthur Highway (old) (A3) – west – Penna, Pawleena File:AUS Alphanumeric Route C331.svg Nugent Road (C331) – northeast – Wattle Hill, Nugent | Roundabout with side junction, replaces northbound T-junction; Nugent Road extended west, replaces former alignment of Arthur Highway | ||
| Iron Creek | 2.9– 3.0 | 1.8– 1.9 | Bridge over creek (name not known) | ||
| Sorell | Forcett | 5.6 | 3.5 | File:AUS Alphanumeric Route C340.svg Lewisham Scenic Drive (C340) – south – Lewisham | |
| 7.1 | 4.4 | File:AUS Alphanumeric Route C334.svg Old Forcett Road (C334) – south – Dodges Ferry | |||
| 7.5 | 4.7 | File:AUS Alphanumeric Route C333.svg Delmore Road (C333) – northeast – Wattle Hill | |||
| 11.9 | 7.4 | File:AUS Alphanumeric Route C349.svg Sugarloaf Road (C349) – south – Carlton River | |||
| Carlton River | 19.0 | 11.8 | Bridge over river (name not known) | ||
| Sorell | Copping | 21.6 | 13.4 | File:AUS Alphanumeric Route C335.svg Kellevie Road (C335) – north – Kellevie | |
| 22.4 | 13.9 | File:AUS Alphanumeric Route C337.svg Marion Bay Road (C337) – east – Bream Creek | |||
| Dunalley | 29.6 | 18.4 | File:AUS Alphanumeric Route C337.svg Bay Road (C337) – northeast – Marion Bay | ||
| 32.0 | 19.9 | File:AUS Alphanumeric Route C334.svg Fulham Road (C334) – west – Connellys Marsh | |||
| Denison Canal | 32.1 | 19.9 | Swing bridge over canal (name not known) | ||
| Tasman | Taranna | 60.2 | 37.4 | File:AUS Alphanumeric Route B37.svg Nubeena Road (B37) – northwest – Nubeena | |
| Port Arthur | 70.2 | 43.6 | File:AUS Alphanumeric Route C347.svg Safety Cove Road (C347) – south – Port Arthur | Southern end of Arthur Highway. Road continues as Nubeena Road (B37) | |
| 1.000 mi = 1.609 km; 1.000 km = 0.621 mi | |||||
See also
[edit | edit source]Lua error in mw.title.lua at line 392: bad argument #2 to 'title.new' (unrecognized namespace name 'Portal').
References
[edit | edit source]- ^ Former State Route Numbering System in Tasmania, Ozroads: the Australian Roads Website. Retrieved 30 January 2008.[self-published source]
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ a b Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value). [self-published source]
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
Lua error in Module:Attached_KML at line 226: attempt to index field 'wikibase' (a nil value).