AIS-SART
An AIS-SART is a self-contained radio device used to locate a survival craft or distressed vessel by sending updated position reports using a standard Automatic Identification System (AIS) class-A position report. The position and time synchronization of the AIS-SART are derived from a built in GNSS receiver (e.g. GPS).[1] Shipboard Global Maritime Distress Safety System (GMDSS) installations include one or more search and rescue locating devices. These devices may be either an AIS-SART (AIS Search and Rescue Transmitter) (from January 1, 2010), or a radar-SART (Search and Rescue Transponder).
The AIS-SART derives position and time synchronization from a built in GNSS receiver. Once per minute, the position is sent as a series of eight identical position report messages (four on 161.975 MHz and four on 162.025 MHz). This scheme creates a high probability that at least one of the messages is sent on the highest point of a wave.
AIS SARTs are typically cylindrical and brightly colored. A typical model is 251 mm (about 10 inches) high and weighs 450g (about a pound).[2]
The specification (IEC 61097-14 Ed 1.0) for AIS-SART was developed by the IEC's TC80 AIS work group. AIS-SART was added to the GMDSS regulations effective January 1, 2010.[3]
See also
[edit | edit source]Lua error in mw.title.lua at line 392: bad argument #2 to 'title.new' (unrecognized namespace name 'Portal').
- Emergency locator beacon
- Emergency Position-Indicating Radio Beacon (EPIRB)
- Civil Air Patrol (US Air Force Auxiliary)
- Long-Range Identification and Tracking (LRIT)
- Marine VHF radio
- Automatic Identification System
- Global Maritime Distress Safety System
References
[edit | edit source]- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
- ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).