List of friction hitch knots

From Wikipedia, the free encyclopedia
(Redirected from Friction hitch)
Jump to navigation Jump to search

Template:SHORTDESC:

A friction hitch is a kind of knot used to attach one rope to another in a way that is easily adjusted. These knots are commonly used in climbing as part of single-rope technique, doubled-rope technique and as "ratchets" to capture progress on a moving rope, most typically in a mechanical advantage system such as a Z-drag. These hitches are a simple and cheap alternative to mechanical ascenders.

List of friction hitches

[edit | edit source]
Knot Description Image
Adjustable grip hitch A simple and useful friction hitch, which may easily be shifted up and down the rope while slack.
Autoblock (Machard or French Prusik) A friction hitch tied around a thicker rope that can slide while unloaded, but locks when loaded. Commonly used to back up belays. Similar to the Prusik only in function. French Prusik is equivalent to bi-directional Machard.
Bachmann hitch
Blake's hitch A friction hitch commonly used by arborists and tree climbers as an ascending knot. Blake's hitch is known by some climbers as a Swicero (Suicero) knot or Verones knot.
Distel Hitch
Ezelius' adjustable grip hitch A slip and grip knot that gives good grip and has a wide range of use. Functions well on a wide range of rope materials, including slippery types like polyamide (nylon) and high-modulus polyethylene (Dynema™). Attaching cord can be of same or smaller diameter. Grip in one direction.
Farrimond friction hitch A quick-release adjustable friction hitch for use on lines under tension.
Gripping sailor's hitch A secure, jam-proof hitch used to tie one rope to another, or a rope to a pole, boom, spar, etc., when the pull is lengthwise along the object. It is also known as Michoacan/Martin among friction knots used in climbing.
Icicle hitch A knot that is excellent for connecting to a post when weight is applied to an end running parallel to the post in a specific direction.
Klemheist hitch A friction hitch tied around a thicker rope that can slide while unloaded, but locks when loaded. Similar to the Prusik. Klemheist knot is a full equivalent to uni-directional Machard.
Knut hitch A friction hitch used for climbing a rope, not to be confused with the Knute hitch.[1]
Machard Tresse A mono-directional variant of the common Machard. Tresse, French for braided, indicates a final crossing turn, which increases the hitch's hold and ease of release.
Michoacan/Martin A friction hitch tied around a thicker rope that can slide while unloaded, but locks when loaded.[2][3] Similar to the Prusik. Michoacan/Martin is a full equivalent to Gripping sailor's hitch File:Michoacan-Martin.JPG
Pile hitch The pile hitch is easier to tie than the icicle hitch, and can be tied in the bight without access to either end of the rope. File:Pile hitch.jpg
Prusik or Prussik A friction hitch or knot used to put a loop of cord around a rope, applied in climbing, canyoneering, mountaineering, caving, rope rescue, and by arborists. File:Prusik.jpg
Rolling hitch (Taut-line hitch) File:Stopperstek.jpg
Schwabisch hitch A friction hitch tied around a thicker rope that can slide while unloaded, but locks when loaded. Similar to the Prusik File:Schwabisch.JPG
Todd-Kramer hitch A friction hitch tied around a thicker rope that can slide while unloaded, but locks when loaded. Similar to the Prusik File:Todd-Kramer5.JPG
Valdotain Tresse Friction knot used to be fixed on a tautline (a taut-rope), also known as a "Valdostano". It is the single cord equivalent of the Machard Tresse (which uses a loop of cord) File:Valdotain-VT.JPG
Cooper's hitch Friction knot used primarily instead of the Valdotain Tresse to which it is similar in design and function.

See also

[edit | edit source]

References

[edit | edit source]
  1. ^ national.sherrilltree.com/site/Climbing_Hitches.pdf
  2. ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  3. ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
[edit | edit source]