Bounded set (topological vector space)

From Wikipedia, the free encyclopedia
Jump to navigation Jump to search

In functional analysis and related areas of mathematics, a set in a topological vector space is called bounded or von Neumann bounded, if every neighborhood of the zero vector can be inflated to include the set. A set that is not bounded is called unbounded.

Bounded sets are a natural way to define locally convex polar topologies on the vector spaces in a dual pair, as the polar set of a bounded set is an absolutely convex and absorbing set. The concept was first introduced by John von Neumann and Andrey Kolmogorov in 1935.

Definition

[edit | edit source]

Suppose X is a topological vector space (TVS) over a topological field 𝕂.

A subset B of X is called von Neumann bounded or just bounded in X if any of the following equivalent conditions are satisfied:

  1. Definition: For every neighborhood V of the origin there exists a real r>0 such that BβŠ†sV[note 1] for all scalars s satisfying |s|β‰₯r.[1]
  2. B is absorbed by every neighborhood of the origin.[2]
  3. For every neighborhood V of the origin there exists a scalar s such that BβŠ†sV.
  4. For every neighborhood V of the origin there exists a real r>0 such that sBβŠ†V for all scalars s satisfying |s|≀r.[1]
  5. For every neighborhood V of the origin there exists a real r>0 such that tBβŠ†V for all real 0<t≀r.[3]
  6. Any one of statements (1) through (5) above but with the word "neighborhood" replaced by any of the following: "balanced neighborhood," "open balanced neighborhood," "closed balanced neighborhood," "open neighborhood," "closed neighborhood".
    • e.g. Statement (2) may become: B is bounded if and only if B is absorbed by every balanced neighborhood of the origin.[1]
    • If X is locally convex then the adjective "convex" may be also be added to any of these 5 replacements.
  7. For every sequence of scalars s1,s2,s3,… that converges to 0 and every sequence b1,b2,b3,… in B, the sequence s1b1,s2b2,s3b3,… converges to 0 in X.[1]
    • This was the definition of "bounded" that Andrey Kolmogorov used in 1934, which is the same as the definition introduced by StanisΕ‚aw Mazur and WΕ‚adysΕ‚aw Orlicz in 1933 for metrizable TVS. Kolmogorov used this definition to prove that a TVS is seminormable if and only if it has a bounded convex neighborhood of the origin.[1]
  8. For every sequence b1,b2,b3,… in B, the sequence (1ibi)i=1∞ converges to 0 in X.[4]
  9. Every countable subset of B is bounded (according to any defining condition other than this one).[1]

If ℬ is a neighborhood basis for X at the origin then this list may be extended to include:

  1. Any one of statements (1) through (5) above but with the neighborhoods limited to those belonging to ℬ.
    • e.g. Statement (3) may become: For every Vβˆˆβ„¬ there exists a scalar s such that BβŠ†sV.

If X is a locally convex space whose topology is defined by a family 𝒫 of continuous seminorms, then this list may be extended to include:

  1. p(B) is bounded for all pβˆˆπ’«.[1]
  2. There exists a sequence of non-zero scalars s1,s2,s3,… such that for every sequence b1,b2,b3,… in B, the sequence b1s1,b2s2,b3s3,… is bounded in X (according to any defining condition other than this one).[1]
  3. For all pβˆˆπ’«, B is bounded (according to any defining condition other than this one) in the semi normed space (X,p).
  4. B is weakly bounded, i.e. every continuous linear functional is bounded on B[5]

If X is a normed space with norm β€–β‹…β€– (or more generally, if it is a seminormed space and β€–β‹…β€– is merely a seminorm),[note 2] then this list may be extended to include:

  1. B is a norm bounded subset of (X,β€–β‹…β€–). By definition, this means that there exists a real number r>0 such that β€–b‖≀r for all b∈B.[1]
  2. supb∈Bβ€–bβ€–<∞.
    • Thus, if L:(X,β€–β‹…β€–)β†’(Y,β€–β‹…β€–) is a linear map between two normed (or seminormed) spaces and if B is the closed (alternatively, open) unit ball in (X,β€–β‹…β€–) centered at the origin, then L is a bounded linear operator (which recall means that its operator norm β€–Lβ€–:=supb∈Bβ€–L(b)β€–<∞ is finite) if and only if the image L(B) of this ball under L is a norm bounded subset of (Y,β€–β‹…β€–).
  3. B is a subset of some (open or closed) ball.[note 3]
    • This ball need not be centered at the origin, but its radius must (as usual) be positive and finite.

If B is a vector subspace of the TVS X then this list may be extended to include:

  1. B is contained in the closure of {0}.[1]
    • In other words, a vector subspace of X is bounded if and only if it is a subset of (the vector space) clX{0}.
    • Recall that X is a Hausdorff space if and only if {0} is closed in X. So the only bounded vector subspace of a Hausdorff TVS is {0}.

A subset that is not bounded is called unbounded.

Bornology and fundamental systems of bounded sets

[edit | edit source]

The collection of all bounded sets on a topological vector space X is called the von Neumann bornology or the (canonical) bornology of X.

A base or fundamental system of bounded sets of X is a set ℬ of bounded subsets of X such that every bounded subset of X is a subset of some Bβˆˆβ„¬.[1] The set of all bounded subsets of X trivially forms a fundamental system of bounded sets of X.

Examples

[edit | edit source]

In any locally convex TVS, the set of closed and bounded disks are a base of bounded set.[1]

Examples and sufficient conditions

[edit | edit source]

Unless indicated otherwise, a topological vector space (TVS) need not be Hausdorff nor locally convex.

  • Finite sets are bounded.[1]
  • Every totally bounded subset of a TVS is bounded.[1]
  • Every relatively compact set in a topological vector space is bounded. If the space is equipped with the weak topology the converse is also true.
  • The set of points of a Cauchy sequence is bounded, the set of points of a Cauchy net need not be bounded.
  • The closure of the origin (referring to the closure of the set {0}) is always a bounded closed vector subspace. This set clX{0} is the unique largest (with respect to set inclusion βŠ†) bounded vector subspace of X. In particular, if BβŠ†X is a bounded subset of X then so is B+clX{0}.

Unbounded sets

A set that is not bounded is said to be unbounded.

Any vector subspace of a TVS that is not a contained in the closure of {0} is unbounded

There exists a FrΓ©chet space X having a bounded subset B and also a dense vector subspace M such that B is not contained in the closure (in X) of any bounded subset of M.[6]

Stability properties

[edit | edit source]
  • In any TVS, finite unions, finite Minkowski sums, scalar multiples, translations, subsets, closures, interiors, and balanced hulls of bounded sets are again bounded.[1]
  • In any locally convex TVS, the convex hull (also called the convex envelope) of a bounded set is again bounded.[7] However, this may be false if the space is not locally convex, as the (non-locally convex) Lp space Lp spaces for 0<p<1 have no nontrivial open convex subsets.[7]
  • The image of a bounded set under a continuous linear map is a bounded subset of the codomain.[1]
  • A subset of an arbitrary (Cartesian) product of TVSs is bounded if and only if its image under every coordinate projections is bounded.
  • If SβŠ†XβŠ†Y and X is a topological vector subspace of Y, then S is bounded in X if and only if S is bounded in Y.[1]
    • In other words, a subset SβŠ†X is bounded in X if and only if it is bounded in every (or equivalently, in some) topological vector superspace of X.

Properties

[edit | edit source]

A locally convex topological vector space has a bounded neighborhood of zero if and only if its topology can be defined by a single seminorm.

The polar of a bounded set is an absolutely convex and absorbing set.

Mackey's countability condition[8]β€”If B1,B2,B3,… is a countable sequence of bounded subsets of a metrizable locally convex topological vector space X, then there exists a bounded subset B of X and a sequence r1,r2,r3,… of positive real numbers such that BiβŠ†riB for all iβˆˆβ„• (or equivalently, such that 1r1B1βˆͺ1r2B2βˆͺ1r3B3βˆͺβ‹―βŠ†B).

Using the definition of uniformly bounded sets given below, Mackey's countability condition can be restated as: If B1,B2,B3,… are bounded subsets of a metrizable locally convex space then there exists a sequence t1,t2,t3,… of positive real numbers such that t1B1,t2B2,t3B3,… are uniformly bounded. In words, given any countable family of bounded sets in a metrizable locally convex space, it is possible to scale each set by its own positive real so that they become uniformly bounded.

Generalizations

[edit | edit source]

Uniformly bounded sets

[edit | edit source]

A family of sets ℬ of subsets of a topological vector space Y is said to be uniformly bounded in Y, if there exists some bounded subset D of Y such that BβŠ†D for every Bβˆˆβ„¬, which happens if and only if its union βˆͺℬ:=⋃Bβˆˆβ„¬B is a bounded subset of Y. In the case of a normed (or seminormed) space, a family ℬ is uniformly bounded if and only if its union βˆͺℬ is norm bounded, meaning that there exists some real Mβ‰₯0 such that β€–b‖≀M for every b∈βˆͺℬ, or equivalently, if and only if supBβˆˆβ„¬b∈Bβ€–bβ€–<∞.

A set H of maps from X to Y is said to be uniformly bounded on a given set CβŠ†X if the family H(C):={h(C):h∈H} is uniformly bounded in Y, which by definition means that there exists some bounded subset D of Y such that h(C)βŠ†D for all h∈H, or equivalently, if and only if βˆͺH(C):=⋃h∈Hh(C) is a bounded subset of Y. A set H of linear maps between two normed (or seminormed) spaces X and Y is uniformly bounded on some (or equivalently, every) open ball (and/or non-degenerate closed ball) in X if and only if their operator norms are uniformly bounded; that is, if and only if suph∈Hβ€–hβ€–<∞.

Proposition[9]β€”Let HβŠ†L(X,Y) be a set of continuous linear operators between two topological vector spaces X and Y and let CβŠ†X be any bounded subset of X. Then H is uniformly bounded on C (that is, the family {h(C):h∈H} is uniformly bounded in Y) if any of the following conditions are satisfied:

  1. H is equicontinuous.
  2. C is a convex compact Hausdorff subspace of X and for every c∈C, the orbit H(c):={h(c):h∈H} is a bounded subset of Y.

Since every singleton subset of X is also a bounded subset, it follows that if HβŠ†L(X,Y) is an equicontinuous set of continuous linear operators between two topological vector spaces X and Y (not necessarily Hausdorff or locally convex), then the orbit H(x):={h(x):h∈H} of every x∈X is a bounded subset of Y.

Bounded subsets of topological modules

[edit | edit source]

The definition of bounded sets can be generalized to topological modules. A subset A of a topological module M over a topological ring R is bounded if for any neighborhood N of 0M there exists a neighborhood w of 0R such that wAβŠ†B.

See also

[edit | edit source]

References

[edit | edit source]
  1. ^ a b c d e f g h i j k l m n o p q r Narici & Beckenstein 2011, pp. 156–175.
  2. ^ Schaefer 1970, p. 25.
  3. ^ Rudin 1991, p. 8.
  4. ^ Wilansky 2013, p. 47.
  5. ^ Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  6. ^ Wilansky 2013, p. 57.
  7. ^ a b Narici & Beckenstein 2011, p. 162.
  8. ^ Narici & Beckenstein 2011, p. 174.
  9. ^ a b Rudin 1991, pp. 42βˆ’47.
  10. ^ Rudin 1991, pp. 46βˆ’47.

Notes

  1. ^ For any set A and scalar s, the notation sA denotes the set sA:={sa:a∈A}.
  2. ^ This means that the topology on X is equal to the topology induced on it by β€–β‹…β€–. Note that every normed space is a seminormed space and every norm is a seminorm. The definition of the topology induced by a seminorm is identical to the definition of the topology induced by a norm.
  3. ^ If (X,β€–β‹…β€–) is a normed space or a seminormed space, then the open and closed balls of radius r>0 (where rβ‰ βˆž is a real number) centered at a point x∈X are, respectively, the sets B<r(x):={z∈X:β€–zβˆ’xβ€–<r} and B≀r(x):={z∈X:β€–zβˆ’x‖≀r}. Any such set is called a (non-degenerate) ball.

Bibliography

[edit | edit source]
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).
  • Lua error in Module:Citation/CS1/Configuration at line 2172: attempt to index field '?' (a nil value).